Skip to content

Matrix Multiplication with MMT4Dlink

Introductionlink

Matrix multiplication (matmul) is an important operation in ML workloads that poses specific challenges to code generation. For example, matmul makes repeated accesses to the same data, which makes locality of reference a top concern.

Moreover, modern CPUs instruction set architectures (ISAs) offer specialized SIMD instructions that the matmul implementation needs to use to achieve optimal performance, and these instructions expect data to be in a particular layout.

This article is about an in-development MLIR operation, linalg.mmt4d, offering a compilation path for linalg.matmul that is designed from the ground up for these efficiency considerations.

We are still in the early implementation phase of this linalg.mmt4d plan, but we feel confident that we know where we are going because what we are really doing here is importing into the compiler what we have learned working on optimized matrix multiplication libraries, particularly Ruy. We know what loop schedule and kernel we want the compiler to generate — essentially the same as we wrote in Ruy, give or take additional optimizations such as fusions and constant folding that become possible now that we are doing this within a compiler. This allows us to focus on how we get the compiler to generate that schedule and kernel with purely algebraic transformations that compose and enable further compiler optimizations.

At the basis of this work is the extensible op system of the Linalg dialect in the MLIR compiler toolkit. In this case, a general purpose, mixed precision mmt4d op is defined via a high level description directly in the compiler and is then available to both users of the compiler (as a linalg.mmt4d op) or for direct emission via Python based IR construction (i.e. for direct integration into high level frameworks without rebuilding the compiler). The ability to define such new special forms cheaply, and without any systemic framework level cost, is part of the extensibility and composition story that we expect will become increasingly important in development and deployment scenarios in the future, and in this case, it let us spring board off of high quality code generation which was already well integrated and composed well with other features of the compiler.

Existing Matrix Multiplication Code Generationlink

Let us start by discussing IREE’s existing matmul code generation and highlight the issues that mmt4d aims to overcome.

The existing approach operates in-place on the source matrices. When we discuss "tiling" in this paragraph, we refer exclusively to the traversal — how these source matrices are traversed by the matmul loop. There is no "tiled layout" here, which will be the key difference with mmt4d below.

The destination matrix is tiled into workgroups (CPU threads) tiles, then each workgroup tile is tiled to fit some level of CPU cache, and finally each tile is further tiled to fit target architecture registers (e.g. 8x8).

That multi-level tiling means that the code works like the following loop nest:

def tiled_matmul(A, B, C, tile_m, tile_n, tile_k, tile_m_v, tile_n_v, tile_k_v):
 m = A.shape[0]
 k = A.shape[1]
 n = B.shape[1]
 for m1 in range(0, m, tile_m):
   for n1 in range(0, n, tile_n):
     for k1 in range(0, k, tile_k):
       # First level of tiling views...
       lhs_tile = A[m1:m1+tile_m, k1:k1+tile_k]
       rhs_tile = B[k1:k1+tile_k, n1:n1+tile_n]
       dst_tile = C[m1:m1+tile_m, n1:n1+tile_n]
       for mv in range(0, tile_m, tile_m_v):
         for nv in range(0, tile_n, tile_n_v):
           for kv in range(0, tile_k, tile_k_v):
             # Register tiling views...
             lhs_tile_v = lhs_tile[mv:mv+tile_m_v, kv:kv+tile_k_v]
             rhs_tile_v = rhs_tile[kv:kv+tile_k_v, nv:nv+tile_n_v]
             # kernel.
             dst_tile[mv:mv+tile_m_v, nv:nv+tile_n_v] += np.matmul(lhs_tile_v, rhs_tile_v)
 return C

The two main problems with this approach are:

  • Overhead to meet SIMD ISA layout requirements: In practice, the kernel needs to use specific SIMD instructions to perform the arithmetic. They expect small tiles of the matrices to be loaded in registers, in a specific layout. If the matrix data wasn't already stored in memory in such a tiled layout, then the kernel has to perform such a data rearrangement on the fly, incurring substantial overhead. For NxN matrix multiplication, the kernel performs O(N3) work on O(N2) data, so doing that rearrangement there means O(N3) overhead where O(N2) should have sufficed, as this could have been done as a pre-processing step on O(N2) data.

  • Inefficent memory traversal: For efficiency reasons, we always need tile_m_v>1 and tile_n_v>1. That is because the higher these values, the fewer memory-load instructions are needed overall; and this is also dictated by the SIMD instructions that we want to use. But that means that the kernel is accessing simultaneously multiple rows or columns of the left-hand and right-hand side matrices. And in this existing approach, they are stored in linear layout, not in a tiled layout, so these accesses are not contiguous in memory. This is detrimental to memory access performance, meaning the CPU caches, in multiple ways. One is that these multiple non-contiguous accesses may alias each other in the L1 cache because of low associativity.

Matrix Multiplication Operation With 4D Tiled Operandslink

For the reasons above, an efficient matmul implementation must reorder data into a tiled layout matching the target SIMD ISA and making the memory access patterns as contiguous as possible.

IREE/MLIR defaults to bufferizing all tensors into a "row-major" order, meaning that the last-enumerated dimension is the one that is contiguous in memory. As we prefer not to write custom bufferization code, we can't specify an alternative layout for a tensor. Fortunately, it is possible to represent a 2D tiled layout as a 4D layout. For example, tensor<2x2x2x2xf32> can represent a 4x4 matrix made of 2x2 tiles, each of which is 2x2. The row-major layout on tensor<2x2x2x2xf32> makes each 2x2 tile contiguous and row-major, and arranges the 2x2 tiles themselves into a row-major 2x2 layout in the overall 4x4 matrix.

Such a row-major-tiled layout is exactly what we need for the left-hand side of a matrix multiplication, because matrix multiplication traverses the left-hand side matrix row by row. But for the right-hand side matrix, we want a column-major-tiled layout. To solve this problem, we decide to implement not matrix multiplication, but matrix-multiplication-by-transposed-right-hand-side which is where the t in the linalg.mmt4d came from. Now such an op is happy with both the left and right-hand sides being row-major-tiled.

The following example illustrates that. In these diagrams, each matrix element is rendered its memory offset.

4x4-tiled

To compute the 2x2 block in the destination matrix, we will have to load two yellow blocks from LHS, RHS matrices respectively compute their matmul results (i.e. call the kernel), then the two blue blocks, and so on. As we can see, each tile loads data that is not contiguous. It would be better if we rearranged the elements in the following layout:

4x4-mmt4d

Now tiles are stored contiguously in memory and the kernel can simply load them from memory into the registers that will be directly consumed by the SIMD instructions performing the multiplications. Moreover, the kernel is now loading from just two contiguous data streams, a simple memory access pattern which is sure to be efficient (regarding caches, etc) on any reasonable target hardware.

We introduce a linalg.mmt4d operation that performs such a matrix multiplication on matrices in a tiled layout represented as 4D tensors. That leaves the question of how to represent, within the linalg dialect, the conversions between ordinary matrices represented as 2D tensors, and these tiled matrices represented as 4D tensors. Moreover, these conversions should be tileable and decompose well. Thankfully, the transformation from 2D to 4D can be written as a reshape followed by a transpose as in the following digram:

graphviz

So we can think of the outermost two dimensions of the 4D representations as the tile position in the overall matrix, and the innermost two as the element position within one tile. Hopefully the following Python pseudocode makes it more concrete:

def pack_2d_4d(operand, parallel_size, reduction_size):
 i1 = operand.shape[0] // parallel_size # M1
 i2 = parallel_size    # M0
 j1 = operand.shape[1] // reduction_size # K1
 j2 = reduction_size   # K0
 operand_4d = np.reshape(operand, [i1, i2, j1, j2])
 return np.transpose(operand_4d, [0, 2, 1, 3]) # [M1, K1, M0, K0]

Now the mmt4d operation will follow a structure as the multi level tiling, for simplicity we considered the case here where no L1 tiling is required only first level of distribution to workgroups:

def mmt4d(A, B, C, M0, N0, K0):
 M = A.shape[0]
 N = B.shape[1]
 Bt = np.transpose(B, [1, 0])
 A4d = pack_2d_4d(A, M0, K0)
 Bt4d = pack_2d_4d(Bt, N0, K0)
 M1 = A4d.shape[0]
 N1 = Bt4d.shape[0]
 K1 = A4d.shape[1]
 for m1 in range(0, M1):
   for n1 in range(0, N1):
     for k1 in range(0, K1):
       # Tile views that are contiguous in memory.
       lhs_tile = np.reshape(A4d[m1, k1, :, :], [M0, K0])
       rhs_tile = np.reshape(Bt4d[n1, k1, :, :], [N0, K0])
       # Inner kernel.
       C[m1, n1, :, :] += np.matmul(lhs_tile, np.transpose(rhs_tile, [1, 0]))
 # 4d -> 2D
 C2d = unpack_4d_2d(C)
 return C2d

The resulting 4D tiled matrix still needs be rearranged back to the original layout as 2D tensor:

def unpack_4d_2d(operand):
 i1 = operand.shape[0] # M1
 j1 = operand.shape[1] # N1
 i2 = operand.shape[2] # M0
 j2 = operand.shape[3] # N0
 operand_transposed = operand.transpose([0, 2, 1, 3]) # [M1, M0, N1, N0]
 return operand_transposed.reshape([i1 * i2, j1 * j2]) # [M, N]

Performance Resultslink

We benchmarked various float32 matmul problems of different sizes and the result showed that mmt4d is faster than the existing matmul implementation for bigger matrices as we can see the in the following chart:

performance

The SIMD instruction being used here is the simplest kind, a vector*scalar multiplication, and the storage orders of the matrices allow the existing implementation to directly load the vectors from the source matrices without any rearrangement overhead. So this case is particularly friendly to the existing code, which is why the mmt4d code is only faster for bigger matrices. To understand why mmt4d is faster in that case, we collected statistics of L1 cache misses:

load-misses

This shows that in this case, the better cache-friendliness of mmt4d, thanks to its simple contiguous memory access pattern, accounts for its higher performance.

As we proceed with increasingly sophisticated SIMD targets, starting with the dot-product instructions found in current mobile devices for the int8 case and going to become generalized to all data types all the way to float32 over the next few years with upcoming ARM SIMD instructions, the advantage of mmt4d will widen for all sizes, not just the larger ones.

Part of why we feel confident about the eventual performance that our approach will achieve is that, as mentioned in the introduction, we are rebuilding within the compiler an existing library's schedule and kernel, and we have benchmark results about it.

Conclusionlink

We introduced a 4d tiled representation for 2d matrix-matrix multiplication with a decomposable algebric transformations that requires only reshape and transpose of input operands, we discussed and empirically showed how that solves major drawbacks in row-major linear matmul by providing a flexible way to match different ISA layout along with better cache locality achieving near peak performance.

As was mentioned in the introduction, this work in under active development and the next immediate steps are to prove the rest of the hypothesis by:

  • Handling dynamic sizes and padding to the next multiple of the target tile size.

  • Implementing the integer case (int32 += int8 * int8).

  • Implementing the dispatch to different SIMD ISA variants at runtime.

  • Implementing cache-friendly traversal for larger matmuls and multi-threading by interfacing with IREE's runtime dispatch.

  • Improving the generated code by fusing the 4d tiled layout with the producers and consumers of the linalg.mmt4d.